SR 10i
문자 물품문의 ☎ 첨단마켓관리자 문의: 02-3142-4151
- 제조년월
:
- 재고상황
-
:
- 세금계산서
-
:
- A/S정보
-
:
The sealed-off CO2 Laser ROFIN SR 10i with an output power of 125 Watt incorporates the industrially proven diffusion-cooled Slab laser design from ROFIN, resulting in a beam that is round and symmetrical, while the ground breaking RF power supply enables the laser to produce short optical pulses with high peak power. This combination allows the customer to cut faster with improved edge quality and minimum heat affected zone.
The sealed-off CO2 Laser ROFIN SR 10i with an output power of 125 Watt incorporates the industrially proven diffusion-cooled Slab laser design from ROFIN, resulting in a beam that is round and symmetrical, while the ground breaking RF power supply enables the laser to produce short optical pulses with high peak power. This combination allows the customer to cut faster with improved edge quality and minimum heat affected zone.
The hard sealed assembly of the laser tube ensures a long gas lifetime with virtually no maintenance - fit and forget. The attention paid to every detail of the engineering process guarantees minimal operating costs. Throughput, economy, flexibility and reliability are the main features associated with the SR 10i.
The SR 10i is the ideal laser source to process a range of materials including plastics, rubber, paper and textiles. Scribing and cutting of alumina ceramic is an ideal application for the SR 10i. The brittleness of ceramic makes it prone to cracking when processed using mechanical machining methods. However, the non-contact localised heating effect of the beam produced by the SR 10i prevents stress producing excellent results. Typically, the laser is used to scribe the ceramic to a depth of 36 μm at speeds of 4 m/min. Due to the wavelength of 10.6 μm, the SR 10i reaches an absorption of close to 100 % into acrylic, which makes the laser an excellent tool for cutting of this material. The cutting is a result of vaporisation. For a piece of acrylic 3.2 mm thick cutting speeds of 2 m/min with a good edge quality can be achieved with the SR 10i.
Technical Data
ROFIN SR 10i |
|
Typical Applications
Laser marking, laser cutting, laser drilling, laser welding or laser heat treating of a wide variety of materials:
판매사 정보
판매사 | 로핀바젤코리아 주식회사 | 홈페이지 | http://www.rofin.co.kr |
---|---|---|---|
구매문의 | 02-6343-7780 | 이메일 | jamielee@rofin.co.kr |
사업장소재지 | 서울특별시 금천구 가산디지털2로 14 (가산동, 대륭테크노타운12차) 대륭테크노타운12차 718호 |
판매사 다른 상품
판매사 정보
상호/대표자 | 로핀바젤코리아 주식회사 / 임용철 | 사업자등록번호 | 220-86-42777 | |
---|---|---|---|---|
사업장소재지 | 서울특별시 금천구 가산디지털2로 14 (가산동, 대륭테크노타운12차) 대륭테크노타운12차 718호 | |||
통신판매업신고번호 |
상품고시 품목별정보
상품정보제공고시
품명 및 모델명 | SR 10i / SR 10i |
---|---|
제조국 또는 원산지 | |
제조사/판매사 | 로핀바젤코리아 주식회사 |
구매문의 | 02-6343-7780 |
상품상태 | 신제품 |
A/S정보 | 가능 |
제조년월 | |
부가가치세 | 가세 |
배송/교환/반품 안내
AS 관련 문의,소비자 피해보상 또는 불만 처리는”판매자 정보”를 참고 하시기 바랍니다.
배송안내 지역,날씨 상황에 따라 달라질 수 있습니다. |
|
---|---|
반품/교환안내 반품/교환에 관한 일반적인 사항은 판매사 제시 사항보다 관례법령이 우선 합니다. |
|
반품/교환 가능기간 먼저 판매자와 연락하여 반품사유,택배사,배송비,반품주소 등을 협의 후에 상품을 발송해 주십시오. |
|
반품/교환 불가사유 |
|