반자동 프린터 T1000
문자 물품문의 ☎ 첨단마켓관리자 문의: 02-3142-4151
- 제조년월
:
- 재고상황
-
:
- 세금계산서
-
:
- A/S정보
-
:
본 장비는 소량 다품종 생산에 적합한 장비이다. Solder Printer에서 제일 중요한 작업은 Squeegee이며, 반복적 작업에도 균일한 품질이 가능한 Double Squeegee가 가능한 장비이며 , 양면 PCB 작업이 가능한 Solder Pointer 입니다.
균일한 프린팅 품질 구현이 가능한 장비이다. X.Y.D측 세밀조정이 가능하며 4면체의 높이 조절이 가능 합니다.
Double Squeegee, 양면 Printing이 가능하며, Table 면은 X.Y 측 고정 탭 홀이 있어 어떠한 제품의 고정이 가능 합니다.
적용공정 : Small Multi Product / 연구소 / 부품소재 / 품질관리 / 정밀을 요구하는 소량 다품종 업종에 적합.
SPEC T1000 | ||
1 | Scraper width | 200mm,280mm(op), Fame Max 490 x 420mm |
2 | Squeegee | 200mm [Standard] , . Max 280mm (option) |
3 | Scraper angle | 60' ( squeegee 각도 ) |
4 | Scraper material | stainless steel(other material can be ordered) |
5 | Adjusting accuracy | 0.01mm |
6 | Repeat accuracy | 0.03mm |
7 | 0.4mm IC | 0.4mm IC |
8 | Expected printing speed | 60 – 100 pcs/h |
9 | Accessories | 1. 8 x Thimbles |
2. 6 x support shelves | ||
3. 1 x Inner hexangular spanner | ||
4. 6 x Nuts and Bolts |
Technique parameter: Introduction
screen printing machine is common equipment in SMT industry, printing process
Include:
1. put and fix PCB(Printed circuit board) at the bottom of moulding board;
2. put solder paste into inside the template scraper is moved by drive device,
solder paste is printed on the PCB through the bore on the template.
3. Raise the template, take out PCB board, finish printing pad on it. the scraper moving
of automatic printing is drive by parallel guideway with screw drive, using screw
rotate to finish scraper moving; rubber scraper is used in manual printer.
Speed, angle and pressure are controlled by operators. with the rapid development of
the electronics industry, the integration of emerging chip increase, the accuracy of the
printer made great challenges, especially for small manual printer, some problems are below:
1 .the worktable can’t meet high precision printing;
2 .manual speed, angle and pressure are not controlled very well;
3. printing consistency is a problem. Manual printer T1000 resolve above problems.
Now, T1000 has applied patent in China. T1000 is similar function with automatic printers with low cost. It reduce cost and improve efficiency.
T1000 principle and technology parameters
▲ T1000 is manual high precision screen printing machine, without electric components
and air components(air handspike)
▲ Scraper moving is driven by precision guideway to make no space touch between
scraper and moulding board.
▲ Using magnetism thimble and omnipotent thimble to position and support PCB to
make sure take off template.
▲ Install template with double side fixing technology.
▲ with two scrapers design. The pressure adjustment is by mechanism adjusted,
mechanism insurance control ascend and descend of scraper.
▲ Round axes guideway can be adjusted by fix frame. All kinds of moulding board can
be installed on printers.
▲ lifting template can be finished by handle, using it with air handspike.
▲ X,Y,Z and angle can be adjusted, adjusting 4 axes to achieve corresponding between
pad and bore, adjust distance between PCB and moulding board by platform.
▲ Fix scraper and run it on the parallel guideway, there are front scraper and back
scraper. They can ascend and descend, after step 1, front(back) scraper fall down
printing location, and then run backward(frontward), after running, scrapers go back
original station.
▲ Max print area:280 x 320mm
Include:
1. 4 x PCB 고정 universal Fixture.
2. 8 x PCB 휨 방지 Support Pin
3. 2 x 200mm Metal Squeegee
4. 1 x 육각 렌지 Driver
5. 1 x 사용자 Manual
▲ Max print area:280 x 320mm (opt)
반복적인 고정밀 프린팅작업에적합.
판매사 정보
판매사 | NamA(남아전자산업) | 홈페이지 | http://www.namasmt.com |
---|---|---|---|
구매문의 | 02-3141-0889 | 이메일 | info@namasmt.com |
사업장소재지 | 서울특별시 마포구 월드컵북로 136 (성산동, 신안빌딩) 신안건설빌딩 7F |
판매사 다른 상품
같은 카테고리 상품
판매사 정보
상호/대표자 | NamA(남아전자산업) / 박준천 | 사업자등록번호 | 105-41-69442 | |
---|---|---|---|---|
사업장소재지 | 서울특별시 마포구 월드컵북로 136 (성산동, 신안빌딩) 신안건설빌딩 7F | |||
통신판매업신고번호 |
상품고시 품목별정보
상품정보제공고시
품명 및 모델명 | 반자동 프린터 T1000 / T1000 |
---|---|
제조국 또는 원산지 | 중국 |
제조사/판매사 | NamA(남아전자산업) |
구매문의 | 02-3141-0889 |
상품상태 | 신제품 |
A/S정보 | 가능 |
제조년월 | |
부가가치세 | 가세 |
배송/교환/반품 안내
AS 관련 문의,소비자 피해보상 또는 불만 처리는”판매자 정보”를 참고 하시기 바랍니다.
배송안내 지역,날씨 상황에 따라 달라질 수 있습니다. |
|
---|---|
반품/교환안내 반품/교환에 관한 일반적인 사항은 판매사 제시 사항보다 관례법령이 우선 합니다. |
|
반품/교환 가능기간 먼저 판매자와 연락하여 반품사유,택배사,배송비,반품주소 등을 협의 후에 상품을 발송해 주십시오. |
|
반품/교환 불가사유 |
|